Technical Part of a Full STM 1890 Port
Technical part
It is the ratio between the successful calls and the attempted
calls that cannot be answered for any reason. In case of lower ASR, it is expected
that the route provided to the call is choked-up for the subscribers to make phone
calls.
- ACD (Average Call Duration) will be minimum 8.5 minute
Average Call Duration (ACD)
It is the total amount of time taken by the call. In case of
lower ACD, it is expected that the quality of the connection is not good enough for the
subscriber to continue the call.
- PDD (Post Dial Delay) will be maximum 1 sec
Post Dial Delay (PDD)
On dialing phone number, either there is a ring or busy tone
that tells us that whether the called party is available or not. The time elapsed between
dialing a number and hearing a tone is referred to as Post Dial Delay (PDD). In case
of higher PDD, it is expected that there is no dial tone for the subscriber to
initiate a call.
- Proper CLI (Command Line Interpreter)display, no prefix (specially 880) or suffix addition in CLI for standard ANI i.e. numeric 8 digit
- No voice break, no one sided voice
- Total capacity must be 600 channel
- No mixing in route, the route we have tested only that RTP will be considered
Comments
Post a Comment